DSPIC33FJ256MC510-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256MC510 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256MC510-I/PF Overview
To save space, it is included in the 100-TQFP package. Surface Mount is used for mounting. Tray is the package that contains it. The device has a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 85 I/Os on the board. It has a part number of DSPIC33FJ256MC510 that can be used to locate similar components. The position of the device is QUAD at terminal. It has 100 terminationals. The electrical component is part of the series dsPIC? 33F. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. For its construction, 100 pins are used. A method of mounting is used, which is Surface Mount. 100 pins are on it in total. The component is included in Digital Signal Processors. In the device, there is a memory capacity of 256kB which may be used to store programs and data. At a frequency of 40MHz, it exhibits excellent efficiency. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 9 timers/counters are in use. There is an oscillator type Internal used in this circuit.
DSPIC33FJ256MC510-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256MC510-I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ256MC510-I/PF Microcontroller applications.
- PDAs, game consoles
- Microwave ovens
- Process control devices
- Teletext terminals
- Information appliances (networking of household appliances)
- Scanners
- Medical instruments chromatographs
- Industrial robot
- Television
- Robots
