DSPIC33FJ256MC710-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ256MC710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 30K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Number of A/D Converters | 2 |
| Format | FIXED-POINT |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 8 |
| Height | 1.0414mm |
| Length | 11.9888mm |
| Width | 11.9888mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ256MC710-I/PT Overview
To save space, it is included in the 100-TQFP package. A Surface Mount mounting method is used. It is available in the Tray package. A core processor of dsPIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. The device has 85 I/Os. In order to find similar components, it has a base part number of DSPIC33FJ256MC710. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 100 terminations present. dsPIC? 33F is the series number of this electrical component. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A number of 100 pins are used to construct it. The method of Surface Mount is used to mount it. This device has a total of 100 pins. Subcategory Digital Signal Processors includes this component. Data and programs may be stored on the devices which have a memory size of 256kB. The system is highly efficient when working at a frequency of 40MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. 9 timer/counters are present. It works with an oscillator type Internal.
DSPIC33FJ256MC710-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ256MC710-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ256MC710-I/PT Microcontroller applications.
- Smartphone
- Ipad
- Multi-meter
- Auto-breaking system
- Aerospace navigation systems
- Tape drives
- Entertainment products
- Projector
- Hand-held metering systems
- Magnetic resonance imaging (MRI)
