DSPIC33FJ32GP202-E/MM
| Parameters | |
|---|---|
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 80mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
DSPIC33FJ32GP202-E/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. The way of mounting it is Surface Mount. Package Tube contains it. A core processor of dsPIC is present in the device. When working, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. There are 21 I/Os on it. Based on the DSPIC33FJ32GP202 base part number, it can be compared with other components. QUAD is the position of its terminals on the board. In this case, there are 28 terminationals. This electrical component is part of the Automotive, AEC-Q100, dsPIC? 33F series. Using the 3.3V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. The structure is composed of 28 pins. Mounting is performed in accordance with Surface Mount. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 32kB which may be used to store programs and data. It should be noted that 80mA represents the maximum supply current. It is highly efficient when it works at a frequency of 40MHz. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. A total of 3 timers/counters have been set up. It belongs to the PIC CPU family. An oscillator of type Internal is used.
DSPIC33FJ32GP202-E/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
DSPIC33FJ32GP202-E/MM Applications
There are a lot of Microchip Technology DSPIC33FJ32GP202-E/MM Microcontroller applications.
- Security systems
- Printers
- 3D printers
- Microwave ovens
- Walkie talkies
- Digital TVs
- Smart highways (navigation, traffic control, information monitoring and car service)
- Instrument control
- Heart rate monitors
- Paper shredders
