DSPIC33FJ32GP202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ32GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Nominal Supply Current | 19mA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16b |
| Density | 256 kb |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ32GP202-I/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. You can find it in the package of Tube. With a processor of dsPIC cores, the device is powered. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. There are 21 I/Os on it. It has a base part number of DSPIC33FJ32GP202 that can be used to find other components that are comparable. The dsPIC? 33F series includes this electrical component. A total of 28 pins are required to construct this device. It is mounted based on the method of Through Hole. There are 28 pins on it. The devices have a memory size of 32kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 40MHz. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. A total of 3 timers/counters have been set up. Using a Internal oscillator type, it works well.
DSPIC33FJ32GP202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
DSPIC33FJ32GP202-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ32GP202-I/SP Microcontroller applications.
- Set-top boxes
- Fabric
- Teletext terminals
- Process control devices
- Christmas lights
- Oil and gas
- Walkie talkies
- Computer/laptop
- Xbox
- Dishwashers
