DSPIC33FJ32GS610-50I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32GS610 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 50 MIPs |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 8 |
| Max Frequency | 40MHz |
| Screening Level | TS 16949 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ32GS610-50I/PF Overview
As a result, it is available in the 100-TQFP package. It is mounted using the way of Surface Mount. In the package Tray, it is included. Devices with dsPIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 85 I/Os on it, which makes it a very simple device. To find comparable components, use the DSPIC33FJ32GS610 base part number. This device has terminals at QUAD. It has 100 terminationals. The dsPIC? 33F series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is one of the components included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 32kB. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. There are 5 timers/counters. There is a maximum frequency of 40MHz on the device. Internal is the oscillator type it uses.
DSPIC33FJ32GS610-50I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32GS610-50I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ32GS610-50I/PF Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- DCS control intelligent sensor
- Sonography (Ultrasound imaging)
- Industrial instrumentation devices
- Multi-meter
- Washing machines
- Firewalls
- Ipod
- Kindle
- Removable disks
