DSPIC33FJ32MC202-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ32MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 80mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Format | FLOATING-POINT |
| RAM (words) | 1024 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ32MC202-E/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. This item can be found in package Tube. The device runs in dsPIC core processor. The temperature should be kept at -40°C~125°C TA while working. FLASH is the type of program memory used by it. 21 I/Os can be found on it. It has a base part number of DSPIC33FJ32MC202 that can be used to find other components that are comparable. DUAL is the position of its terminals on the board. 28 terminations are present in it. Part of the Automotive, AEC-Q100, dsPIC? 33F series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 28 pins. Based on the Through Hole method, it is mounted. On it, there are 28 pins. In the subcategory of Digital Signal Processors, this component is included. Using the devices' 32kB memory size, you can store programs and data. 80mA is the maximum supply current. At a frequency of 40MHz, it exhibits excellent efficiency. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 3 timers/counters are in use. An oscillator type Internal is required for it to work.
DSPIC33FJ32MC202-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ32MC202-E/SP Applications
There are a lot of Microchip Technology DSPIC33FJ32MC202-E/SP Microcontroller applications.
- Smoke alarms
- Teletext terminals
- Data acquisition and control
- Walkie talkies
- Equipment control
- Embedded gateways
- Robotic prosthetic limbs
- Xbox
- Medical instruments chromatographs
- Answering machines
