DSPIC33FJ32MC202-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 70mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 256 kb |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| Number of SPI Channels | 2 |
| Height | 880μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ32MC202-I/MM Overview
To save space, it is included in the 28-VQFN Exposed Pad package. Mounted using Surface Mount. You can find it in the package of Tube. The device runs in dsPIC core processor. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 21 I/Os are present. To find equivalent components, use its DSPIC33FJ32MC202 base part number. At QUAD, it has its terminals. It has 28 terminationals. In the dsPIC? 33F series, this electrical component is found. The supply voltage of 3.3V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 28 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. Total number of pins is 28. This component is a part of Digital Signal Processors. In order to store data and programs, the devices have a memory size of 32kB. The maximum supply current is set at 70mA. The system is highly efficient when working at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are currently 5 timers/counters set up on the system. Using an oscillator type Internal, it operates.
DSPIC33FJ32MC202-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32MC202-I/MM Applications
There are a lot of Microchip Technology DSPIC33FJ32MC202-I/MM Microcontroller applications.
- Sonography (Ultrasound imaging)
- Washing machine
- Routers
- Paper shredders
- Scanners
- Oscilloscopes
- Hand-held metering systems
- Washing machines
- Heater/Fan
- Communication-bluetooth, Wi-Fi, radio
