DSPIC33FJ32MC204-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 70mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| Format | FLOATING-POINT |
| Number of SPI Channels | 1 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ32MC204-I/ML Overview
As a result, it is available in the 44-VQFN Exposed Pad package. The way of mounting it is Surface Mount. It comes in the package?of a Tube. Device with dsPIC core processor issupported. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 35 I/Os have been provided by the device. To find equivalent components, use its DSPIC33FJ32MC204 base part number. This device has terminals at QUAD. There are a total of 44 terminations in it. In the dsPIC? 33F series, this electrical component is found. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. 44 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. There are 44 pins on it. Digital Signal Processors contains this component. Data and programs can be stored on the devices with a memory size of 32kB. There is a maximum current supply of 70mA. It is highly efficient when it works at a frequency of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 3 timer/counters are present. Internal is the oscillator type it uses.
DSPIC33FJ32MC204-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32MC204-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ32MC204-I/ML Microcontroller applications.
- Switches
- Fire alarms
- Teletext terminals
- Multi-meter
- Projectors
- X-ray
- Equipment control
- Guidance-GPS
- Oil and gas
- Digital cameras
