DSPIC33FJ32MC302-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32MC302 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 256 kb |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ32MC302-I/MM Overview
There is a 28-VQFN Exposed Pad package available to save space. Using Surface Mount, it is mounted. A package of Tube contains it. dsPIC core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. FLASH is its program memory type. 21 I/Os have been provided by the device. Based on the DSPIC33FJ32MC302 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. In this case, there are 28 terminationals. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. There are a total of 28 pins on it. Subcategory Digital Signal Processors includes this component. Using the devices' 32kB memory size, you can store programs and data. The maximum supply current is 76mA. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. A total of 5 timers/counters have been set up. It works with an oscillator type Internal.
DSPIC33FJ32MC302-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32MC302-I/MM Applications
There are a lot of Microchip Technology DSPIC33FJ32MC302-I/MM Microcontroller applications.
- Wastewater treatment
- Fax machines
- Computer/laptop
- Petrochemical
- Christmas lights
- Dryers
- DVD\DV\MP3 players
- Washing machines
- Current meter
- Scanners
