DSPIC33FJ32MC304-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32MC304 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ32MC304-E/PT Overview
For space savings, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. In the package Tray, it is included. Devices with dsPIC core processors are available. When working, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. There are 35 I/Os on it. Based on its base part number of DSPIC33FJ32MC304, other similarly-sized components can be found. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 44 terminations present. An electrical component such as this is included in the series Automotive, AEC-Q100, dsPIC? 33F. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. 44 pins are used to construct it. As a result, it is mounted in accordance with Surface Mount. On it, there are 44 pins. Digital Signal Processors contains this component. In the device, there is a memory capacity of 32kB which may be used to store programs and data. Supply current cannot exceed 76mA. It is highly efficient when it works at a frequency of 40MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. The number of timers and counters is 5. An oscillator of type Internal is used.
DSPIC33FJ32MC304-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32MC304-E/PT Applications
There are a lot of Microchip Technology DSPIC33FJ32MC304-E/PT Microcontroller applications.
- Industrial robot
- Magnetic resonance imaging (MRI)
- Home appliances
- Coffee machines
- Digital TVs
- Industrial instrumentation devices
- Speed meter
- Virtual reality VR robots
- Security systems
- Oil and gas
