DSPIC33FJ64GP306-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP306 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 512 kb |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP306-I/PT Overview
As a result, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. Package Tray contains it. dsPIC core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. A total of 53 I/Os are present. Based on its base part number of DSPIC33FJ64GP306, other similarly-sized components can be found. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 64 terminations present. The dsPIC? 33F series contains this electrical component. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A number of 64 pins are used to construct it. The method of Surface Mount is used to mount it. It is equipped with 64 pins in total. It is one of the components included in Digital Signal Processors. A device with a memory size of 64kB can store programs and data. At a frequency of 40MHz, it exhibits excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. A total of 9 timers/counters are present. Using an oscillator type Internal, it operates.
DSPIC33FJ64GP306-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP306-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64GP306-I/PT Microcontroller applications.
- Virtual reality VR robots
- Blood pressure monitors
- Xbox
- Ipad
- Torpedo guidance
- Graphic terminals
- Medical instruments chromatographs
- Aerospace navigation systems
- Telephone sets
- Routers
