DSPIC33FJ64GP708-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP708 |
| Pin Count | 80 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 512 kb |
| Format | FIXED-POINT |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP708-I/PT Overview
For the purpose of saving space, it is available in the 80-TQFP package. In this case, it is mounted using the method of Surface Mount. A package of Tray contains it. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 69 I/Os. A component with the same part number as DSPIC33FJ64GP708 can be compared to other similar components. The terminals of this device are set to QUAD. This circuit consists of 80 terminationals. An electrical component such as this is included in the series dsPIC? 33F. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 80 pins. The method of Surface Mount is used to mount it. 80 pins are on it in total. It belongs to the subcategory Digital Signal Processors. In order to store data and programs, the devices have a memory size of 64kB. A 3.3V power source powers it. It performs extremely well at a frequency of 40MHz. The number of timers and counters is 9. Normally, the supply voltage (Vsup) should remain above 3V. Using oscillator type Internal makes it work.
DSPIC33FJ64GP708-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP708-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64GP708-I/PT Microcontroller applications.
- Smartphone
- Toys
- Heater/Fan
- Temperature sensing and controlling devices
- Graphic terminals
- Broadband technology, video and voice processing
- Radio
- Automatic staplers
- Hearing aids
- Digital cameras
