DSPIC33FJ64GP710-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP710-I/PF Overview
There is a 100-TQFP package available to save space. Surface Mount is used for mounting. This item can be found in package Tray. The device runs in dsPIC core processor. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 85 I/Os can be found on it. A comparable component can be found by using the base part number DSPIC33FJ64GP710. At QUAD, it has its terminals. It has 100 terminationals. dsPIC? 33F is the series number of this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed using 100 pins. The method of Surface Mount is used to mount it. There are a total of 100 pins on it. Digital Signal Processors contains this component. Using the devices' 64kB memory size, you can store programs and data. It performs extremely well at a frequency of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. The number of timers and counters is 9. The oscillator type Internal is used to operate the device.
DSPIC33FJ64GP710-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP710-I/PF Applications
There are a lot of Microchip Technology DSPIC33FJ64GP710-I/PF Microcontroller applications.
- Speed meter
- Aerospace navigation systems
- Broadband technology, video and voice processing
- Industrial instrumentation devices
- Toasters
- Laminators
- Mice
- Fire alarms
- Automatic staplers
- Measuring revolving objects
