DSPIC33FJ64GP710-I/PT
| Parameters | |
|---|---|
| Peripherals | AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP710 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
DSPIC33FJ64GP710-I/PT Overview
A space-saving advantage is that it is included in the 100-TQFP package. A Surface Mount mounting method is used. Package Tray contains it. Device with dsPIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 85 I/Os on it. It has a part number of DSPIC33FJ64GP710 that can be used to locate similar components. At QUAD, its terminals are located. 100 terminations are present in it. This electrical component is part of the dsPIC? 33F series. High efficiency is possible due to the 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed with 100 pins. The method of Surface Mount is used to mount it. This device has a total of 100 pins. Subcategory Digital Signal Processors includes this component. Data and programs can be stored on the devices with a memory size of 64kB. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. The number of timers and counters is 9. The oscillator type Internal is used to operate the device.
DSPIC33FJ64GP710-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP710-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64GP710-I/PT Microcontroller applications.
- Christmas lights
- DCS control intelligent sensor
- Home appliances
- Robotic prosthetic limbs
- Microwave ovens
- Microwave ovens
- Laminators
- PDAs, game consoles
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Communication-bluetooth, Wi-Fi, radio
