DSPIC33FJ64GP802-H/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 20 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ64GP802-H/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. It is available in the Tube package. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~150°C TA. Its type of program memory is FLASH. There are 21 I/Os on the board. Other components that are comparable to it have the base part number DSPIC33FJ64GP802. At QUAD, its terminals are located. In this case, there are 28 terminationals. The Automotive, AEC-Q100, dsPIC? 33F series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 28 pins. There are 28 pins on it. Digital Signal Processors contains this component. The devices have a memory size of 64kB that can be used to store programs and data. The system is highly efficient when working at a frequency of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. It appears that there are 5 timers/counters in use. There is an oscillator type Internal used in this circuit.
DSPIC33FJ64GP802-H/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP802-H/MM Applications
There are a lot of Microchip Technology DSPIC33FJ64GP802-H/MM Microcontroller applications.
- Kindle
- Measuring revolving objects
- Torpedo guidance
- Fire detection & safety devices
- Television
- Ipad
- Oscilloscopes
- Home video and audio
- Air fryers
- ECG machine
