DSPIC33FJ64GP802-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 10 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP802-I/MM Overview
A space-saving advantage is that it is included in the 28-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. It comes in a Tube package. It is equipped with a dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH is its program memory type. 21 I/Os are present on the device. Other components that are comparable to it have the base part number DSPIC33FJ64GP802. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. 28 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It has a total of 28 pins on it. It belongs to the subcategory Digital Signal Processors. In order to store data and programs, the devices have a memory size of 64kB. This device achieves excellent efficiency at frequencies of 40MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. 5 timer/counters are present. Using oscillator type Internal makes it work.
DSPIC33FJ64GP802-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP802-I/MM Applications
There are a lot of Microchip Technology DSPIC33FJ64GP802-I/MM Microcontroller applications.
- Tape drives
- Ipad
- Fire alarms
- Industrial instrumentation devices
- Paper shredders
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Blenders
- Hand-held metering systems
- Smart instruments
- Routers
