DSPIC33FJ64GP802-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP802 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 2.05mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP802-I/SO Overview
A space-saving advantage is that it is included in the 28-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. It comes in the package?of a Tube. dsPIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. There are 21 I/Os on it. Other components that are comparable to it have the base part number DSPIC33FJ64GP802. At DUAL, it has its terminals. It consists of 28 terminationals. This electrical component is part of the dsPIC? 33F series. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 28 pins are used in its construction. According to Surface Mount, it is mounted. This device has a total of 28 pins. This is a component included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 64kB. The system is highly efficient when working at a frequency of 40MHz. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are 5 timers/counters. Internal is the oscillator type it uses.
DSPIC33FJ64GP802-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP802-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ64GP802-I/SO Microcontroller applications.
- Electrocardiogram (EKG)
- Light sensing & controlling devices
- Guidance-GPS
- Process control devices
- Playstation
- Oil and gas
- Industrial instrumentation devices
- Teletext terminals
- Computers and laptops-video calling, email, blogging
- DCS control intelligent sensor
