DSPIC33FJ64GP804-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 880μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP804-I/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. Mounted using Surface Mount. This item can be found in package Tube. dsPIC core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 35 I/Os on it. It has a base part number of DSPIC33FJ64GP804 that can be used to find other components that are comparable. The terminals are positioned at QUAD. In this case, there are 44 terminationals. It is a member of the dsPIC? 33F series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A number of 44 pins are used to construct it. Based on the Surface Mount method, it is mounted. In total, it has 44 pins. This is a component included in Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 64kB. At a frequency of 40MHz, it can achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. 5 timer/counters are present. It works with an oscillator type Internal.
DSPIC33FJ64GP804-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP804-I/ML Applications
There are a lot of Microchip Technology DSPIC33FJ64GP804-I/ML Microcontroller applications.
- Accu-check
- Computers and laptops-video calling, email, blogging
- Switches
- DCS control intelligent sensor
- Teletext terminals
- Digital set-top boxes
- Temperature sensing and controlling devices
- Air fryers
- Ipad
- Walkie talkies
