DSPIC33FJ64GP804-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64GP804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 34mA |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b; D/A 2x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 13 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64GP804-I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. The way of Surface Mount is used to mount it. It is available in the Tray package. The device runs in dsPIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH is its program memory type. A total of 35 I/Os are present. It has a base part number of DSPIC33FJ64GP804 that can be used to find other components that are comparable. The position of the device is QUAD at terminal. There are a total of 44 terminations in it. dsPIC? 33F is the series number of this electrical component. Using the 3.3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. The structure is composed of 44 pins. The method of Surface Mount is used to mount it. Total number of pins is 44. In the subcategory of Digital Signal Processors, this component is included. A device with a memory size of 64kB can store programs and data. When working at a frequency of 40MHz it is able to achieve excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are 5 timers/counters. The oscillator type Internal is used to operate the device.
DSPIC33FJ64GP804-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64GP804-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64GP804-I/PT Microcontroller applications.
- Dishwashers
- Volt meter
- Routers
- Leakage current tester
- Process control devices
- Equipment control
- Accu-check
- Removable disks
- DCS control intelligent sensor
- Gas monitoring systems
