DSPIC33FJ64MC202-I/SP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ64MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of SPI Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
DSPIC33FJ64MC202-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. A Through Hole mounting method is used. It comes in a Tube package. With a processor of dsPIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 21 I/Os on it, which makes it a very simple device. It has a part number of DSPIC33FJ64MC202 that can be used to locate similar components. A DUAL position is assigned to its terminals. This circuit consists of 28 terminationals. In the dsPIC? 33F series, this electrical component is found. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 28 pins. This mount is done in accordance with the method of Through Hole. There are 28 pins on it. It falls under the category of Digital Signal Processors. The devices have a memory size of 64kB that can be used to store programs and data. In this case, 76mA represents the maximum current supply. The system is highly efficient when working at a frequency of 40MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. A total of 5 timers/counters are present. Using an oscillator type of Internal, it works.
DSPIC33FJ64MC202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ64MC202-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ64MC202-I/SP Microcontroller applications.
- Refrigerators
- Radio
- Toasters
- Fax machines
- Electromechanical control
- Equipment control
- Petrochemical
- Industrial instrumentation devices
- Data acquisition and control
- Communication-bluetooth, Wi-Fi, radio
