DSPIC33FJ64MC204-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64MC204-E/PT Overview
There is an option to purchase it in the 44-TQFP package, which saves space. Using Surface Mount, it is mounted. Tray is the package that contains it. Device with dsPIC core processor issupported. During work, the temperature should remain at -40°C~125°C TA. FLASH is the type of program memory used by it. The device has 35 I/Os. Based on the DSPIC33FJ64MC204 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. In this case, there are 44 terminationals. The Automotive, AEC-Q100, dsPIC? 33F series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed with 44 pins. During the mounting process, the device is mounted based on the Surface Mount method. It has a total of 44 pins on it. Digital Signal Processors contains this component. It is possible to store programs and data on the devices, as they have a memory size of 64kB. It should be noted that 76mA represents the maximum supply current. Using a frequency of 40MHz, it is very efficient. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 5 timers/counters are present. An oscillator type Internal is required for it to work.
DSPIC33FJ64MC204-E/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC204-E/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC204-E/PT Microcontroller applications.
- 3D printers
- DVD\DV\MP3 players
- Kindle
- Leakage current tester
- Hand-held metering systems
- Home video and audio
- Sonography (Ultrasound imaging)
- Printers
- Home appliances
- Digital set-top boxes
