DSPIC33FJ64MC204T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ64MC204T-I/PT Overview
As a result, it is available in the 44-TQFP package. Surface Mount is the way to mount it. In the package Tape & Reel (TR), it is included. dsPIC core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. The device has 35 I/Os. A comparable component can be found by using the base part number DSPIC33FJ64MC204. At QUAD, it has its terminals. As far as terminations are concerned, there are 28 terminations present. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed using 44 pins. According to Surface Mount, it is mounted. There are a total of 44 pins on it. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 64kB that can be used to store programs and data. It is important to note that the maximum supply current is 76mA. Working at a frequency of 40MHz results in excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 5 timers/counters are present. The oscillator type Internal is used to operate the device.
DSPIC33FJ64MC204T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC204T-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC204T-I/PT Microcontroller applications.
- Pacemakers (used to control abnormal heart rhythm)
- Xbox
- Medical instruments chromatographs
- Safety -airbags, automatic braking system (ABS)
- Electromechanical control
- Digital TVs
- Information appliances (networking of household appliances)
- Torpedo guidance
- Smart instruments
- Petrochemical
