DSPIC33FJ64MC508-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC508 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Density | 512 kb |
| Format | FIXED-POINT |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64MC508-I/PT Overview
A space-saving advantage is that it is included in the 80-TQFP package. Mounted using Surface Mount. It comes in a Tray package. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. There is FLASH program memory in it. 69 I/Os have been provided by the device. It has a part number of DSPIC33FJ64MC508 that can be used to locate similar components. QUAD is the location of its terminals. It consists of 80 terminationals. This electrical component is part of the dsPIC? 33F series. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 80 pins are required to construct this device. A method of mounting is used, which is Surface Mount. A total of 80 pins are attached to it. In Digital Signal Processors, this component is included. A device with a memory size of 64kB can store programs and data. Using a frequency of 40MHz, it is very efficient. The supply voltage of 3.3V's adaptability can be fully utilised by designers. A total of 9 timers/counters are present. Using oscillator type Internal makes it work.
DSPIC33FJ64MC508-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC508-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC508-I/PT Microcontroller applications.
- Smoke alarms
- Home video and audio
- Set-top boxes
- Industrial instrumentation devices
- Calculator
- Playstation
- Measuring revolving objects
- Torpedo guidance
- X-ray
- Instrument control
