DSPIC33FJ64MC706-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC706 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 512 kb |
| Number of A/D Converters | 2 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33FJ64MC706-I/PT Overview
Due to its space-saving qualities, it is available in the 64-TQFP package. A Surface Mount mounting method is used. Tray is the package that contains it. The device runs in dsPIC core processor. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 53 I/Os on it. It has a part number of DSPIC33FJ64MC706 that can be used to locate similar components. The terminals of this device are located at QUAD. 64 terminationals are present. Part of the dsPIC? 33F series, this electrical component is used in a variety of applications. The supply voltage of 3.3V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A number of 64 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. 64 pins are on it in total. Digital Signal Processors contains this component. Memory size for the devices is 64kB, which can be used to store programs and data. It performs extremely well at a frequency of 40MHz. The supply voltage of 3.3V's adaptability can be fully utilised by designers. 9 timers/counters are in use. Using an oscillator type Internal, it operates.
DSPIC33FJ64MC706-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC706-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC706-I/PT Microcontroller applications.
- Smoke alarms
- Projector
- Kindle
- Robotic prosthetic limbs
- Current meter
- X-ray
- Refrigerators
- Petrochemical
- Calculators
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
