DSPIC33FJ64MC804-H/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 20 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 8192 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ64MC804-H/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. Using Surface Mount, it is mounted. In the package Tube, it is included. Devices with dsPIC core processors are available. Work should be performed at a temperature of -40°C~150°C TA. In terms of its program memory type, it is FLASH. The device has 35 I/Os. It has a base part number of DSPIC33FJ64MC804 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. In this case, there are 44 terminationals. It is a member of the Automotive, AEC-Q100, dsPIC? 33F series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. The structure is composed of 44 pins. It is equipped with 44 pins in total. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 64kB. 76mA is the maximum supply current. At a frequency of 40MHz, it can achieve excellent efficiency. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 5 counters/timers are currently active. Using a Internal oscillator type, it works well.
DSPIC33FJ64MC804-H/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC804-H/ML Applications
There are a lot of Microchip Technology DSPIC33FJ64MC804-H/ML Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Guidance-GPS
- Tape drives
- Smoke alarms
- Fax machines
- Smart highways (navigation, traffic control, information monitoring and car service)
- Process control devices
- Laminators
- Computer/laptop
- Multi-meter
