DSPIC33FJ64MC804-H/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | Automotive, AEC-Q100, dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.2.A |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 20 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 8192 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ64MC804-H/PT Overview
There is an option to purchase it in the 44-TQFP package, which saves space. The way of mounting it is Surface Mount. Package Tray contains it. A dsPIC core processor powers the device. The temperature should be kept at -40°C~150°C TA while working. FLASH has been assigned to it as a program memory. A total of 35 I/Os are present. Based on the DSPIC33FJ64MC804 base part number, it can be compared with other components. At QUAD, its terminals are located. Currently, it consists of 44 terminationals. This electrical component is part of the Automotive, AEC-Q100, dsPIC? 33F series. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. The structure is constructed from 44 pins. In total, it has 44 pins. In the subcategory of Digital Signal Processors, this component is included. Data and programs can be stored on the devices with a memory size of 64kB. The maximum supply current is set at 76mA. Working at a frequency of 40MHz results in excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. 5 timers/counters are in use. Using a Internal oscillator type, it works well.
DSPIC33FJ64MC804-H/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC804-H/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC804-H/PT Microcontroller applications.
- Answering machines
- Wastewater treatment
- Tape drives
- Vacuum cleaners
- Industrial instrumentation devices
- Calculators
- Hearing aids
- Smoke alarms
- Medical instruments chromatographs
- Glucose monitoring systems (for Type 1 Diabetes)
