E-L6219R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6219 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 10V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 4.55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 500mA |
| Voltage - Load | 4.5V~10V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
E-L6219R Overview
Drivers controllers is designed wDrivers controllersh a package of [0].This part is packed in a 24-SOIC (0.295, 7.50mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.In this case, the device can supply 4.75V~5.25V volts.The operating temperature ranges from -20°C~150°C TJto -20°C~150°C TJ.There is a motor type Brushed DCavailable.The part supports 24terminations.You can apply voltage at 4.5V~10Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Keep the part output current at 500mA.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.Using the L6219part number, it is located.24pins are present on the device.Drivers controllers belongs to the series [0].There is 10V supply voltage required for this driver.
E-L6219R Features
Applications : General Purpose
Load voltage across the chip 4.5V~10V
base on L6219 number
E-L6219R Applications
There are a lot of STMicroelectronics E-L6219R motor drivers applications.
- drivers for outdoor application
- Charge pump circuits
- Automotive exterior and interior lighting
- Street lights
- Automotive applications
- Running preventive- maintenance diagnostics
- Outdoor area lights
- Architectural lighting
- Lighting for health and wellbeing
- CHMSL (center high-mount stop lamps)
