E-L6386D013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Max Power Dissipation | 750mW |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | L6386 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 650mA |
| Nominal Supply Current | 320μA |
| Output Current | 650mA |
| Max Supply Current | 320μA |
| Input Type | Inverting |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.015 µs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| Turn Off Time | 0.015 µs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
E-L6386D013TR Overview
In order to increase flexibility, the package 14-SOIC (0.154, 3.90mm Width) is used.Gate drivers is packaged in the way of Tape & Reel (TR).Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.By using 17V Max supply voltage, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Inverting is used.Mosfet driver is based on 14 terminations.There are numerous related parts listed under its base part number L6386.The mount method is Surface Mount.A total of 14 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 15V.Mosfet driver is possible for the output current to be as low as 650mA.The component has 14 pins.Maximum (Bootstrap) voltage is 600V.The output current of this device can be set to 650mA.Considering its maximum power dissipation, 750mW shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 320μA.
E-L6386D013TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
E-L6386D013TR Applications
There are a lot of STMicroelectronics E-L6386D013TR gate drivers applications.
- Isolated Gate Driver Supplies
- Dual-Battery Systems
- Refrigerator
- Uninterruptible Power Supplies (UPS)
- UPS systems
- PCMCIA applications
- Motor Control
- High power buffers
- Industrial Modules
- Commercial and agricultural vehicles (CAV)
