E-L9338MD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9338 |
| Pin Count | 20 |
| Output Voltage | 45V |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | Low Side |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3.5 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 4.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 4 |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 1.7 Ω |
| Drain to Source Resistance | 2.3Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
E-L9338MD Overview
As a result, it is packaged in the form of a Tube.The 20-SOIC (0.295, 7.50mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the L9338 family.In total, there are 20 terminations.The operation is carried out using the 20 pins.Currently, there are 4 functions associated with the lighting driver.A supply voltage of 14V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 20 pins are included in this LED driver.In this case, the output current will be set to 5mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The Vsup value (maximum supply voltage) is set to 32V.It is equipped with 4 drivers.
E-L9338MD Features
Supplied from 14V
E-L9338MD Applications
There are a lot of STMicroelectronics E-L9338MD Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- Wireless Modem Data Cards
- Mobile Communication Devices
- PDAs
- USB Ports/Hubs
- Storage Drives
- Hot-Swap Systems
- Wearable Devices
- Smart Phones, Feature Phones
