E-L9823
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9823 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Power Supplies | 5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Nominal Supply Current | 6mA |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Max Supply Current | 6mA |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 100 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1.6A |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
E-L9823 Overview
Tube is how it's packaged.It's included in the 24-SOIC (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver is equipped with 8 outputs.The maximum output voltage is N-Channel volts.It comes under the family of L9823.The termination count is 24.In order to operate, the 24 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 1.6A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 24 pins.There is 1Ohm resistance on the LED driver.When this is the case, the output current is set to 500mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part has a power supply of 5V.For its operation, a current of 6mA is required.In addition to 5.5VV, it can handle other voltages as well.
E-L9823 Features
Supplied from 5V
Resistance of 1Ohm
E-L9823 Applications
There are a lot of STMicroelectronics E-L9823 Power Switches ICs applications.
- Solid-State Drives
- Portable GPS Device
- Smartphone and PDA
- Portable Music Players
- Set-Top Boxes
- USB3.1 Power Delivery
- Hot Swap
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable Video Game Players
