Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
1.5Ohm |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Frequency |
3MHz |
Base Part Number |
L9826 |
Pin Count |
20 |
Number of Outputs |
8 |
Output Type |
N-Channel |
Max Output Current |
1A |
Voltage |
7V |
Interface |
SPI |
Nominal Supply Current |
5mA |
Current |
1A |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
4.5V~5.5V |
Max Supply Current |
5mA |
Propagation Delay |
100 ns |
Turn On Delay Time |
10 μs |
Switch Type |
Latched Driver |
Output Current per Channel |
450mA |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 μs |
Ratio - Input:Output |
1:8 |
Voltage - Load |
45V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
1.5 Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Height |
2.35mm |
Length |
13mm |
Width |
7.6mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
E-L9826TR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of Latched Driver.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 8 outputs available on this lighting driver.It uses a supply voltage of 4.5V~5.5V to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the L9826 family.A total of 20 terminations can be found in it.The 20 pins are used for the operation of the system.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 1A.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.20 pins are connected to it in total.Currently, the LED driving board has 1.5Ohm resistance.For its operation, a maximum current requirement of 5mA is required.
E-L9826TR Features
Supplied from 5V
Resistance of 1.5Ohm
E-L9826TR Applications
There are a lot of STMicroelectronics E-L9826TR Power Switches ICs applications.
- Hot Swap
- Portable GPS Device
- USB Power Distribution
- Handheld Devices
- Smart Phones, Feature Phones
- Wearable Devices
- Notebook and Tablet Computers
- Portable Music Players
- Hot Swaps
- Wireless Headsets