Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.433, 11.00mm Width) Exposed Pad |
Number of Pins |
20 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
Automotive |
JESD-609 Code |
e3 |
Feature |
Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Standby |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Tin (Sn) |
HTS Code |
8542.33.00.01 |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
32W |
Voltage - Supply |
8V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TDA7391 |
Pin Count |
20 |
Output Type |
1-Channel (Mono) |
Operating Supply Voltage |
15V |
Supply Voltage-Max (Vsup) |
18V |
Power Supplies |
14.4V |
Supply Voltage-Min (Vsup) |
8V |
Number of Channels |
1 |
Power Dissipation |
32W |
Supply Current-Max |
150mA |
Output Power |
32W |
Common Mode Rejection Ratio |
65 dB |
Supply Type |
Single |
Bandwidth |
22 kHz |
Voltage Gain |
30dB |
Gain |
30 dB |
Max Output Power |
40W |
Input Bias Current |
10μA |
Max Output Power x Channels @ Load |
40W x 1 @ 3.2 Ω |
Height Seated (Max) |
3.5mm |
Length |
15.7mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
E-TDA7391PDTR Overview
Amp parts is embedded in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package.Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .In addition, there are 20 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Output 1-Channel (Mono) is configured for this device.The device is of type Class AB .Computers or other communication devices have 20 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .Its supply voltage is 8V~18V volts.This device is equipped with a total of 1 channels.The operation of Depop, Differential Inputs, Mute, Short-Circuit and Thermal Protection, Standby can be ensured.Temperatures should not exceed -40°C~150°C TJ .A total of 20 pins are present on the device.This chip belongs to Audio/Video Amplifiers .Amp parts belongs to the TDA7391 family.Amp parts is mounted in the way of Surface Mount .As of this moment, the maximum Output Power of this electronic part is 40W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 8V .18V is the maximum supply voltage (Vsup).There is a Single supply type on this electronic part.Amp parts operates from a 14.4V power supply.This item is part of the Automotive series.Supply currents are limited to 150mA .
E-TDA7391PDTR Features
20-SOIC (0.433, 11.00mm Width) Exposed Pad package
20 pin count
TDA7391 family
40W kWh per hour
Automotive series
E-TDA7391PDTR Applications
There are a lot of STMicroelectronics E-TDA7391PDTR audio amplifiers applications.
- Proportional counter tubes
- Logarithmic and exponential operation circuits
- Communication
- Test equipment
- Signal operation
- Fission chambers
- Industrial control system
- ECG equipment
- High-frequency data acquisition systems
- Integrator and differentiator circuits