E-UC2845BD1013TR
| Parameters | |
|---|---|
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 500kHz |
| Base Part Number | UC2845 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
E-UC2845BD1013TR Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). 7.6V~30V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -25°C~85°C TA rating. It can switch at Up to 500kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. UC2845 can be searched for other relevant dc to dc converter ics. There are 8 pins on switching converter. Statistically, the DC regulator outputs 5.05V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is 500kHz frequency setting on the switching controller. Users should apply 30V to operate the voltage regulator dc to dc safely and reliably. As long as the dc switching is in a dormant state, it utilizes 12mA.
E-UC2845BD1013TR Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
E-UC2845BD1013TR Applications
There are a lot of STMicroelectronics E-UC2845BD1013TR DC to DC converter applications.
- Computer-related products
- Alternators
- Computed tomography (CT)
- Servo drive system
- Automatic testing equipment
- Bending machines
- Large fire protection systems
- Lathes
- Photovoltaic power
- Serial communication converter
