E-UC2845BN
| Parameters | |
|---|---|
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 48% |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | UC2845 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.05V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
E-UC2845BN Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tube enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). 7.6V~30V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -25°C~85°C TA. In this switching controller, the switch can be set to Up to 500kHz. The Through Hole makes it ideal for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. The 8 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "UC2845". There are 8 pins on switching converter. A 5.05V voltage of DC regulator was detected in the test statistics. The dc to dc regulator is limited to 30V input voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at 500kHz Hz. In dormant mode, 12mA is used.
E-UC2845BN Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
E-UC2845BN Applications
There are a lot of STMicroelectronics E-UC2845BN DC to DC converter applications.
- Household control circuits
- Medical monitoring systems
- Analog precision reference circuits
- Product testing
- Domestic water pumps
- Packaging
- Experimental setup
- Electrical power transmission
- Digital video recorders
- Refrigerators of central air conditioners
