E3FA-RN22
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3FA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 500μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 19.685 (500mm) |
| Sensing Method | Reflective |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3FA-RN22 Overview
Photoelectric sensors should be set at -25°C~55°C for reliable performance. For these electronic components to function, a circuit or system should have 0 volts. Photoelectric sensors have an ideal response time of 500μs. It's important to connect 4 pins for the photoelectric sensor to work. Photoelectric sensor output current should be 100mA for it to operate. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. Photoelectric sensors work at as low a voltage as possible, for example 10V.
E3FA-RN22 Features
Sensing Distance: 19.685 (500mm)
4 pins
Response Time: 500μs
Operating Temperature: -25°C~55°C
E3FA Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FA-RN22 Applications
There are a lot of Omron Automation and Safety E3FA-RN22 Photoelectric Sensors applications.
- Pharmaceutical industry
- Counting small objects
- Luminescence sensors
- detect objects
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Checking objects on production lines or conveyors
- Material handling
- Measuring distance
- Logistics and materials handling
