Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Housing Material |
ABS |
Operating Temperature |
-25°C~55°C |
Published |
2012 |
Series |
E3FA |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
10V~30V |
Ingress Protection |
IEC IP67, IP69K |
Output Configuration |
PNP - Dark-ON/Light-ON - Selectable |
Output Current |
100mA |
Response Time |
500μs |
Adjustment Type |
Single-Turn |
Sensing Distance |
787.4 (20m) |
Sensing Method |
Reflective |
Sensors/Transducers Type |
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM |
Max Supply Voltage (DC) |
30V |
Connection Method |
Connector |
Light Source |
Red LED |
Min Supply Voltage (DC) |
10V |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Ratings |
IP67 |
E3FA-TP21 Overview
You should set the photoelectric sensor's temperature to -25°C~55°C for reliable performance. For these electronic components to work, the voltage should be provided by 10V~30V. The ideal response time for a photoelectric sensor is 500μs. A photoelectric sensor must have an output current of 100mA. There is no damage to the photoelectric sensor when applied a voltage of 30V in a DC circuit. As low a voltage as possible, such as 10V, can be used by this photoelectric sensor.
E3FA-TP21 Features
Sensing Distance: 787.4 (20m)
Response Time: 500μs
Operating Temperature: -25°C~55°C
E3FA Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FA-TP21 Applications
There are a lot of Omron Automation and Safety E3FA-TP21 Photoelectric Sensors applications.
- Detecting colours
- Luminescence sensors
- Material handling
- Counting small objects
- Monitoring bigger areas for objects with light grids
- Checking objects on production lines or conveyors
- Automatic doors
- Passive infrared sensors
- Zone scanners
- detect objects