E3FZ-D87
| Parameters | |
|---|---|
| Housing Material | ABS |
| Operating Temperature | -25°C~55°C |
| Published | 2002 |
| Series | E3FZ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Connector |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 1 ms |
| Response Time | 1ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 0.039 (1mm) |
| Sensing Method | Reflective, Diffuse |
| Load Current | 100mA |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (860nm) |
| Min Supply Voltage (DC) | 10V |
| RoHS Status | RoHS Compliant |
| Ratings | IP67, IP69K |
E3FZ-D87 Overview
For reliable performance, set the photoelectric sensor to -25°C~55°C. Circuits or systems that use these components should have a voltage of 10V~30V. An ideal response time for photoelectric sensors is 1ms. To maintain reliability, the photoelectric sensor works at a minimum temperature of -25°C. It is possible to operate on a reliable level at a temperature of 55°C. It is possible to apply the maximum voltage of 30V to the photoelectric sensor without damaging it in a DC circuit. It is possible to operate this photoelectric sensor at a voltage as low as possible, for example at zero volts.
E3FZ-D87 Features
Sensing Distance: 0.039 (1mm)
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3FZ Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 1 ms
E3FZ-D87 Applications
There are a lot of Omron Automation and Safety E3FZ-D87 Photoelectric Sensors applications.
- Material handling
- Zone scanners
- Detecting colours
- Automatic doors
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Luminescence sensors
- Measuring distance
- Logistics and materials handling
- Passive infrared sensors
