E3G-L15
| Parameters | |
|---|---|
| Surface Mount | NO |
| Mounting Feature | PANEL MOUNT |
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 2000 |
| Series | E3G |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67, NEMA 4 |
| Reach Compliance Code | unknown |
| Body Length or Diameter | 30mm |
| Body Breadth | 18 mm |
| Output Type | NPN |
| Operating Supply Voltage | 30V |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 1.5ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 0.197 ~ 1.969 (5mm ~ 50mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Connection Method | Connector |
| Light Source | Red (670nm) |
| Measurement Range-Max | 50 mm |
| Measurement Range-Min | 5 mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3G-L15 Overview
The temperature of the photoelectric sensor should be set to -25°C~55°C to ensure reliable performance. Circuits or systems that use these components should have a voltage of 10V~30V. A photoelectric sensor with a response time of 1.5ms is considered to be ideal. For the photoelectric sensor to work properly, 4 pins must be connected in order to make it work. The output current of a photoelectric sensor must be 100mA. The photoelectric sensor supply voltage should be set to 30V for maximum efficiency.
E3G-L15 Features
Sensing Distance: 0.197 ~ 1.969 (5mm ~ 50mm) ADJ
4 pins
Response Time: 1.5ms
Operating Temperature: -25°C~55°C
E3G Series
E3G-L15 Applications
There are a lot of Omron Automation and Safety E3G-L15 Photoelectric Sensors applications.
- Passive infrared sensors
- Luminescence sensors
- Entrance and gate
- Automotive industry
- Detecting colours
- Counting small objects
- Measuring distance
- Material handling
- Mechanical engineering
- Contrast sensors
