E3G-L36
| Parameters | |
|---|---|
| Mount | Screw |
| Number of Pins | 4 |
| Housing Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2001 |
| Series | E3G |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67, NEMA 4 |
| Reach Compliance Code | unknown |
| Body Length or Diameter | 30mm |
| Body Breadth | 18 mm |
| Output Type | PNP |
| Operating Supply Voltage | 24V |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Response Time | 2.5ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 0.197 ~ 7.874 (5mm ~ 200mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Connection Method | Connector |
| Light Source | Infrared (860nm) |
| Measurement Range-Max | 200 mm |
| Measurement Range-Min | 5 mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3G-L36 Overview
Photoelectric sensors should be set at -25°C~55°C for reliable performance. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. A photoelectric sensor should have a response time of 2.5ms. The photoelectric sensor must have the 4 pins connected to work properly. It is recommended that the photoelectric sensor's supply voltage be set to 24V for optimal performance.
E3G-L36 Features
Sensing Distance: 0.197 ~ 7.874 (5mm ~ 200mm) ADJ
4 pins
Response Time: 2.5ms
Operating Temperature: -25°C~55°C
E3G Series
E3G-L36 Applications
There are a lot of Omron Automation and Safety E3G-L36 Photoelectric Sensors applications.
- Counting small objects
- Material handling
- Automatic doors
- Luminescence sensors
- detect objects
- Zone scanners
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Passive infrared sensors
- Contrast sensors
