E3HF-1E2
| Parameters | |
|---|---|
| Mount | Screw |
| Operating Temperature | -25°C~55°C |
| Published | 2001 |
| Series | E3HF |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IP64 |
| Output Configuration | NPN - Open Collector/Dark-ON |
| Output Current | 80mA |
| Response Time | 5ms |
| Sensing Distance | 39.370 (1m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 24V |
| Connection Method | Cable |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 12V |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
E3HF-1E2 Overview
It is recommended that the photoelectric sensor is set at -25°C~55°C to ensure reliable performance. If you want these electronic components to work, you need to apply 12V~24V. Sensors with a response time of 5ms are considered ideal. For a photoelectric sensor to function, the output current should be 80mA. It is possible to apply a voltage of 24V to the photoelectric sensor in a DC circuit without causing damage. As low a voltage as possible, such as 12V, can be used by this photoelectric sensor.
E3HF-1E2 Features
Sensing Distance: 39.370 (1m)
Response Time: 5ms
Operating Temperature: -25°C~55°C
E3HF Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
E3HF-1E2 Applications
There are a lot of Omron Automation and Safety E3HF-1E2 Photoelectric Sensors applications.
- Entrance and gate
- Pharmaceutical industry
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Passive infrared sensors
- Logistics and materials handling
- Counting small objects
- Measuring distance
- Zone scanners
- Checking objects on production lines or conveyors
