E3JM-DS70M4-US
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Screw |
| Number of Pins | 12 |
| Housing Material | Plastic |
| Weight | 130.407806g |
| Operating Temperature | -25°C~55°C |
| Published | 1999 |
| Series | E3JM |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Cable |
| Connector Type | Terminal Block |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 12V~240V 24V~240V |
| Ingress Protection | IEC IP66 |
| Approval Agency | UL |
| Output Configuration | Relay - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 30 ms |
| Adjustment Type | Single-Turn |
| Sensing Distance | 27.559 (700mm) |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Max Supply Voltage (DC) | 240V |
| Connection Method | Terminal Block |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 12V |
| Max Supply Voltage (AC) | 240.24kV |
| Min Supply Voltage (AC) | 2.412kV |
| Height | 65mm |
| Length | 65mm |
| Width | 24.9mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP66 |
E3JM-DS70M4-US Overview
To make sure the photoelectric sensor works, set its temperature to zero. To make these electronic components work, they should be supplied with 12V~240V 24V~240V voltage. To make the photoelectric sensor work properly, 12 pins must be connected. In a DC circuit, you can apply a voltage of 240V without damaging the photoelectric sensor. Photoelectric sensors can operate at low voltages, such as 12V.
E3JM-DS70M4-US Features
Sensing Distance: 27.559 (700mm)
12 pins
Operating Temperature: -25°C~55°C
E3JM Series
Maximal Supply Voltage (DC): 240V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 30 ms
E3JM-DS70M4-US Applications
There are a lot of Omron Automation and Safety E3JM-DS70M4-US Photoelectric Sensors applications.
- Pharmaceutical industry
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Zone scanners
- Counting small objects
- Detecting colours
- Contrast sensors
- Checking objects on production lines or conveyors
- detect objects
- Luminescence sensors
