E3S-AD11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Screw |
| Number of Pins | 3 |
| Weight | 59.533999g |
| Body Material | Polybutylene |
| Operating Temperature | -25°C~55°C |
| Published | 2006 |
| Series | E3S-A |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 4X; IEC IP67 |
| Reach Compliance Code | unknown |
| Approval Agency | UL |
| Lead Length | 2m |
| Max Output Current | 100mA |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Max Voltage Rating (DC) | 30V |
| Turn On Delay Time | 500 μs |
| Adjustment Type | Two-Turn Endless Adjuster with an Indicator |
| Sensing Distance | 7.874 (200mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Red (700nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 40mm |
| Length | 22.3mm |
| Width | 12.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-AD11 Overview
It is recommended to set the temperature of a photoelectric sensor to -25°C~55°C in order to ensure reliable operation. The voltage of this electronic components should be given 10V~30V into a circuit or system to make it work. 3 pins must be connected for the photoelectric sensor to work. Whenever a photoelectric sensor is operating, the output current should be zero. The maximum voltage of 30V in a DC circuit can be applied to the photoelectric sensor without causing damage. In this photoelectric sensor, the voltage can be as low as possible, such as 0 volts. For best performance, set the photoelectric sensor's supply voltage to 24V. Sensors used with photoelectricity can work with an output current up to 100mA. Photoelectric sensors operate at 0 volts in DC circuits.
E3S-AD11 Features
Sensing Distance: 7.874 (200mm)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AD11 Applications
There are a lot of Omron Automation and Safety E3S-AD11 Photoelectric Sensors applications.
- Contrast sensors
- Zone scanners
- Entrance and gate
- Material handling
- Automatic doors
- Automotive industry
- Logistics and materials handling
- detect objects
- Counting small objects
- Pharmaceutical industry
