E3S-AD12
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Screw |
| Number of Pins | 3 |
| Weight | 59.533999g |
| Body Material | Polybutylene |
| Operating Temperature | -25°C~55°C |
| Published | 2005 |
| Series | E3S-A |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 4X; IEC IP67 |
| Reach Compliance Code | unknown |
| Approval Agency | UL |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 500 μs |
| Adjustment Type | Two-Turn Endless Adjuster with an Indicator |
| Sensing Distance | 27.559 (700mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 22.3mm |
| Length | 40mm |
| Width | 12.4mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-AD12 Overview
In order for the photoelectric sensor to work reliably, it should be set to -25°C~55°C degrees Celsius. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. The photoelectric sensor must be connected to 3 pins in order to function properly. DC circuit can apply a maximum voltage of 30V without harming the photoelectric sensor. Photoelectric sensors work at as low a voltage as possible, for example 10V. Photoelectric sensors should be supplied with 24V voltage for best performance.
E3S-AD12 Features
Sensing Distance: 27.559 (700mm)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AD12 Applications
There are a lot of Omron Automation and Safety E3S-AD12 Photoelectric Sensors applications.
- Luminescence sensors
- Material handling
- Zone scanners
- Monitoring bigger areas for objects with light grids
- Pharmaceutical industry
- Entrance and gate
- detect objects
- Automotive industry
- Contrast sensors
- Checking objects on production lines or conveyors
