E3S-AD13
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 3 |
| Housing Material | Polybutylene |
| Weight | 59.5g |
| Operating Temperature | -25°C~55°C |
| Published | 1999 |
| Series | E3S-A |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 4X; IEC IP67 |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Cable Length | 2m |
| Turn On Delay Time | 500 μs |
| Adjustment Type | Two-Turn Endless Adjuster with an Indicator |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 22.3mm |
| Length | 40mm |
| Width | 12.4mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-AD13 Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -25°C~55°C. For these electronic components to function, they require a voltage of 10V~30V to be applied to a circuit or system. The 3 pins on the photoelectric sensor need to be connected for it to work. The photoelectric sensor can withstand a maximum voltage of 30V in a DC circuit without sustaining damage. It can work at 0V, which is the lowest voltage possible for this type of sensor. To get the best performance from your photoelectric sensor, set the supply voltage to 24V.
E3S-AD13 Features
Sensing Distance: 3.937 (100mm)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AD13 Applications
There are a lot of Omron Automation and Safety E3S-AD13 Photoelectric Sensors applications.
- Pharmaceutical industry
- Counting small objects
- Detecting colours
- Passive infrared sensors
- Contrast sensors
- Mechanical engineering
- Entrance and gate
- Automatic doors
- Measuring distance
- Checking objects on production lines or conveyors
