E3S-AD87
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Screw |
| Number of Pins | 3 |
| Housing Material | Polybutylene |
| Operating Temperature | -25°C~55°C |
| Published | 2005 |
| Series | E3S-A |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 4X; IEC IP67 |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Turn On Delay Time | 500 μs |
| Adjustment Type | Two-Turn Endless Adjuster with an Indicator |
| Sensing Distance | 27.559 (700mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 21mm |
| Length | 51.3mm |
| Width | 12mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-AD87 Overview
To make sure the photoelectric sensor works, set its temperature to zero. Circuits or systems that use these components should have a voltage of 10V~30V. To make the photoelectric sensor work properly, 3 pins must be connected. The output current of a photoelectric sensor must be 100mA. A photoelectric sensor can withstand a voltage of 30V in a DC circuit without being damaged. This photoelectric sensor can work at as low a voltage as possible, such as 10V. For optimal efficiency, set the supply voltage to 24V.
E3S-AD87 Features
Sensing Distance: 27.559 (700mm)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AD87 Applications
There are a lot of Omron Automation and Safety E3S-AD87 Photoelectric Sensors applications.
- Counting small objects
- Automatic doors
- Checking objects on production lines or conveyors
- Measuring distance
- Contrast sensors
- Entrance and gate
- Detecting colours
- detect objects
- Monitoring bigger areas for objects with light grids
- Material handling
