Parameters |
Factory Lead Time |
1 Week |
Mount |
Brackets, Screw |
Number of Pins |
3 |
Housing Material |
Polybutylene |
Operating Temperature |
-25°C~55°C |
Published |
2002 |
Series |
E3S-A |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
12V~24V |
Ingress Protection |
NEMA 4X; IEC IP67 |
Reach Compliance Code |
unknown |
Lead Length |
2m |
Operating Supply Voltage |
24V |
Output Configuration |
PNP - Dark-ON/Light-ON - Selectable |
Output Current |
100mA |
Turn On Delay Time |
500 μs |
Adjustment Type |
Two-Turn Endless Adjuster with an Indicator |
Sensing Distance |
275.591 (7m) |
Sensing Method |
Through-Beam |
Max Supply Voltage (DC) |
30V |
Connection Method |
Cable |
Light Source |
Red (700nm) |
Min Supply Voltage (DC) |
10V |
Height |
22.3mm |
Length |
44mm |
Width |
12.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Ratings |
IP67 |
E3S-AT31 Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -25°C~55°C. Electronic components should be connected to a circuit or system by 12V~24V voltage. Connecting the 3 pins is necessary for the photoelectric sensor to work properly. It needs a current of 100mA at the output to work. It is possible to apply a voltage of 30V to the photoelectric sensor in a DC circuit without causing damage. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor. Photoelectric sensors should have their supply voltage set to 0.
E3S-AT31 Features
Sensing Distance: 275.591 (7m)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AT31 Applications
There are a lot of Omron Automation and Safety E3S-AT31 Photoelectric Sensors applications.
- Luminescence sensors
- Contrast sensors
- Zone scanners
- Counting small objects
- Pharmaceutical industry
- Automotive industry
- Material handling
- detect objects
- Mechanical engineering
- Automatic doors