E3S-AT86

12V~24V E3S-A Series Two-Turn Endless Adjuster with an Indicator Through-Beam 3-Pin -25°C~55°C

Manufacturer: Omron Automation and Safety
Nocochips NO: 607-E3S-AT86
Package: -
Datasheet: PDF
Stock: 308
Description: 12V~24V E3S-A Series Two-Turn Endless Adjuster with an Indicator Through-Beam 3-Pin -25°C~55°C (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Screw
Number of Pins	3
Housing Material	Polybutylene
Operating Temperature	-25°C~55°C
Published	2002
Series	E3S-A
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Termination	Connector
Voltage - Supply	12V~24V
Ingress Protection	NEMA 4X; IEC IP67
Reach Compliance Code	unknown
Operating Supply Voltage	24V
Output Configuration	PNP - Dark-ON/Light-ON - Selectable
Output Current	100mA
Turn On Delay Time	500 μs
Adjustment Type	Two-Turn Endless Adjuster with an Indicator
Sensing Distance	275.591 (7m)
Sensing Method	Through-Beam
Max Supply Voltage (DC)	30V
Connection Method	Cable
Light Source	Red (700nm)
Min Supply Voltage (DC)	10V
Height	21mm
Length	51.3mm
Width	12mm
RoHS Status	RoHS Compliant
Ratings	IP67

E3S-AT86 Overview

For reliable performance, set the photoelectric sensor to -25°C~55°C. For these electronic components to function, a voltage of 12V~24V should be applied to a circuit or system. To make the photoelectric sensor work properly, 3 pins must be connected. The output current of a photoelectric sensor must be 100mA. The photoelectric sensor is not damaged by voltage of 30V applied in DC circuit. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor. It is recommended that the photoelectric sensor's supply voltage be set to 24V for optimal performance.

E3S-AT86 Features

Sensing Distance: 275.591 (7m)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs