E3S-CL2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | DIN Rail |
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 1998 |
| Series | E3S-CL |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Connector Type | Cable, Wire |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P; IEC IP67 |
| Lead Length | 2m |
| Operating Supply Voltage | 24V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 2ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 0.197 ~ 7.874 (5mm ~ 200mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Wire |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 42.6mm |
| Length | 37.2mm |
| Width | 15.4mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-CL2 Overview
You should set the photoelectric sensor's temperature to -25°C~55°C for reliable performance. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. Sensors with a response time of 2ms are ideal. To make sure it's reliable, the photoelectric sensor works at -25°C. Reliable operation is enabled by a maximum operating temperature of 55°C. The photoelectric sensor must be connected to 4 pins in order to function properly. Photoelectric sensors must have an output current of 100mA in order to operate. A photoelectric sensor can be operated at a maximum voltage of 30V in a DC circuit without damage occurring. At low voltages, such as 10V, this photoelectric sensor is capable of working. If you want the best performance, set the supply voltage to 24V.
E3S-CL2 Features
Sensing Distance: 0.197 ~ 7.874 (5mm ~ 200mm) ADJ
4 pins
Response Time: 2ms
Operating Temperature: -25°C~55°C
E3S-CL Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3S-CL2 Applications
There are a lot of Omron Automation and Safety E3S-CL2 Photoelectric Sensors applications.
- detect objects
- Pharmaceutical industry
- Detecting colours
- Passive infrared sensors
- Logistics and materials handling
- Material handling
- Checking objects on production lines or conveyors
- Luminescence sensors
- Contrast sensors
- Counting small objects
