E3S-CR11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Brackets, Horizontal, Panel, Screw |
| Package / Case | Metal |
| Number of Pins | 3 |
| Weight | 109.99615g |
| Operating Temperature | -25°C~55°C |
| Published | 1998 |
| Series | E3S-C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 55°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 1, 4X, 6P, 12, 13; IEC 144 IP67 |
| Approval Agency | CE |
| Lead Length | 2m |
| Operating Supply Voltage | 24V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 40mA |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Turn On Delay Time | 1 ms |
| Response Time | 1ms |
| Rise Time | 1ms |
| Adjustment Type | Adjustable, 3/4-Turn Potentiometer |
| Sensing Distance | 118.110 (3m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Wire |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 29.5mm |
| Length | 50mm |
| Width | 40.4mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Ratings | IP67 |
E3S-CR11 Overview
To make sure your photoelectric sensor is reliable, set its temperature to -25°C~55°C. In order for these electronic components to work, they should be given 10V~30V voltage. The ideal response time for photoelectric sensors is 1ms. Reliability is ensured by working at a minimum temperature of -25°C. Having a maximum operating temperature of 55°C ensures that the system will operate reliably. This photoelectric sensor can only function properly if the 3 pins are connected. Photoelectric sensors are designed to operate with a current of 100mA at the output. The maximum voltage of 30V in DC circuit can be applied to the photoelectric sensor without damage. As low a voltage as possible, such as 10V, can be used by this photoelectric sensor. Set the supply voltage of the photoelectric sensor to 24V for best results. Photoelectric sensors are included in the Metal package as a convenience. Photoelectric sensors are set to have a supply current of 40mA.
E3S-CR11 Features
Sensing Distance: 118.110 (3m)
3 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
Available in Metal package
E3S-C Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 1 ms
E3S-CR11 Applications
There are a lot of Omron Automation and Safety E3S-CR11 Photoelectric Sensors applications.
- Logistics and materials handling
- Contrast sensors
- Entrance and gate
- Counting small objects
- Zone scanners
- Automotive industry
- Automatic doors
- Material handling
- Passive infrared sensors
- Monitoring bigger areas for objects with light grids
