Parameters |
Factory Lead Time |
1 Week |
Mount |
Brackets, Screw |
Number of Pins |
4 |
Housing Material |
Polybutylene |
Operating Temperature |
-25°C~55°C |
Published |
2002 |
Series |
E3T |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Voltage - Supply |
12V~24V |
Ingress Protection |
IEC IP67 |
Output Configuration |
NPN - Open Collector/Light-ON |
Output Current |
50mA |
Max Voltage Rating (DC) |
24V |
Turn On Delay Time |
1 ms |
Rise Time |
1ms |
Sensing Distance |
0.197 ~ 0.591 (5mm ~ 15mm) ADJ |
Sensing Method |
Reflective, Convergent |
Max Supply Voltage (DC) |
24V |
Connection Method |
Wire |
Light Source |
Red (650nm) |
Min Supply Voltage (DC) |
12V |
Length |
2mm |
Width |
7mm |
REACH SVHC |
Unknown |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Ratings |
IP67 |
E3T-SL11 Overview
You'll get reliable performance if the photoelectric sensor's temperature is -25°C~55°C. In order for these electronic components to function, the voltage should be set to 12V~24V within the circuit or system. To make the photoelectric sensor work properly, 4 pins must be connected. Photoelectric sensors must have an output current of 50mA in order to operate. A photoelectric sensor can be operated at a maximum voltage of 24V in a DC circuit without damage occurring. As low a voltage as possible, such as 12V, can be used by this photoelectric sensor. The photoelectric sensors operate with maximum voltage of 24V in DC circuit.
E3T-SL11 Features
Sensing Distance: 0.197 ~ 0.591 (5mm ~ 15mm) ADJ
4 pins
Operating Temperature: -25°C~55°C
E3T Series
Maximal Supply Voltage (DC): 24V
Minimal Supply Voltage (DC): 12V
Turn On Delay Time: 1 ms
E3T-SL11 Applications
There are a lot of Omron Automation and Safety E3T-SL11 Photoelectric Sensors applications.
- Entrance and gate
- Automotive industry
- Detecting colours
- Material handling
- Zone scanners
- Luminescence sensors
- Automatic doors
- Measuring distance
- Contrast sensors
- Passive infrared sensors